This 6 Cylinder Dry Sump Oil System was originally designed for race cars and have been running successfully for 5 reliable years.

This BMW 6 Cylinder Dry Sump Kit fits the following engines: M50, M52, M52TU, M54, S50, S50 Euro, S52, S52 Euro, S54.

Kits feature:
-CAD designed and CNC machined billet aluminum parts
Help ensure positive lubrication
-Increased oiling system reliability under all cornering conditions
-Underdrive Hardcoat Anodized pulley system
-Underdrive pulley features a step on the back to allow installation of aftermarket crank trigger pulleys
-Toothed belt system
-Peterson Oil Pump which is the best in the industry

Kit Includes the following parts:
-Peterson 4 Stage Dry Sump Pump
-Peterson Pump Pulley
-CV Pump Drive Pulley & Washer & Bolt
-Motorsports Underdrive Pulley & Adaptor
-Pump Mounting Bracket with hardware and spacers
-Motorsports Oil Filter Housing Replacement Plate
-2 Dry Sump Pump Belts
-2 -12 Inline Scavenge Filters

*NOTE: You may also require our dry sump pan to go with this kit, listed elsewhere on this page.



Estimated Product Shipping Weight inc Packaging: 20.00 Kg

 

 

Specially designed for BMW race engines!!! This is THE ORIGINAL and best Billet Aluminum Racing Oil Filter Housing. It is made from finely finished 6061 T6 aluminum. The two piece design allows direct replacement of factory housing and maintains alternator and power steering in their original locations.

Designed for compatibility with our Dry Sump Kit.
Allows easy install of Accusump systems.
Provides oil temp, oil pressure, and Vanos line ports.
The 2 pieces come fully assembled and supplied with AN fittings and P/S Pump Spacers.
A full two pounds lighter than factory housing.
Allows for easy service of components beneath intake manifold.
Simplifies plumbing of remote oil cooler in all applications.

Fits all BMW I6 + 24 valve engines in M5X & S5X series.



Estimated Product Shipping Weight inc Packaging: 5.00 Kg

 

 

Preserve your limited slip differential. When your differential's oil temp gets too high, you lose horsepower and risk CDF (Catastrophic Differential Failure). There is only one way to control it, and that is with a Differential Oil Cooler Kit. You can install this kit underneath the car or inside the boot.

This kit is supplied with:

Differential Oil Pump
Mocal Differential Cooler
All Fittings Necessary to Complete Install
10 ft length -10 Aeroquip Hose
Instructions

Some post 2006 applications may require slight alterations to fittings.


Estimated Product Shipping Weight inc Packaging: 6.00 Kg

 

 

These direct replacement radiator hoses are harder wearing and more visually pleasing that the factory parts.

Estimated Product Shipping Weight inc Packaging: 1.00 Kg

 

 

Developed as a result of our extensive work on supercharged cars, this enlarged capacity radiator holds almost an extra 3 litres of coolant.

Suitable for tuned as well as standard engines.

The cooler your engine runs the more power it will produce and the less internal wear it will suffer, simple as that.

Provides a greater safety margin against possible overheating of your engine for conditions such as :

- naturaly aspirated tuning
- forced induction ( turbo and super charged)
- race use
- hard road use
- hot climates

NOTES:

1. the OEM plastic fan blades require a little trimming for clearance and fan shroud must be cut into two halves laterally. This does not reduce overall increased cooling
2. for even more efficient cooling we suggest fitment of an electric fan and deletion of the OEM viscous fan, eg Pacet fan.
3. cars fitted with OEM oil coolers that affix to underside of OEM radiator with bolts etc require cable tieing ( supplied) to bumper brackets when fitting this enlarged radiator.

Fitting Time: 3.00 hours.
Estimated Installation Cost at CA Workshops: £175.00 inc. VAT
Estimated Product Shipping Weight inc Packaging: 2.00 Kg

 

 

Now for a limited time this pump comes with lifetime warranty!
This completely new water pump is the solution to your cooling issues. This pump will flow up to 20% more than your factory pump and will help prevent the cavitation that causes overheating.

Up to 20% Increase In Flow
Stainless Steel Impeller
Twice As Efficient as Factory Pump
Much Less Parasitic Drag Than Other Pumps

Fits most 1992-2005 24V engines including E34 525i, E36 325i, 328i, US M3 3.0L and 3.2L and E39 528i.


Estimated Product Shipping Weight inc Packaging: 6.00 Kg

 

 

If you are upgrading the power on your engine then you may want to consider our high - volume oil pumps.

These units are re machined to provide approx 25% more volume flow than the standard part.

Available for most BMW engines.

These are sold on an excahnge basis.

Estimated Product Shipping Weight inc Packaging: 5.00 Kg

 

E36 328 M50 VERSION SHOWN


E36 328 M50 VERSION SHOWN

 

If you are running a high permormance modified engine then an adequate oil supply in terms of both pressure and volume is essential... and the factory oil pump simply may not be up to the job.

These high volume pumps are capable of increasing oil delivery volume by around 20%.

They are manufactured using original BMW parts and the price includes the fitted oil pump upgrade kit listed elsewhere on this section.

Your original oil pump may be required in exchange depending on vehicle model.

Estimated Product Shipping Weight inc Packaging: 5.00 Kg

 

OEM FILTER HOUSING REQD. FOR NON M3 MODELS

 

In order to fit our cooler kit (as seen lower down the page)to an E36 or E46 NON - M3 model you will need one of these genuine oil filter housings as well, as the kit is designed to install into this housing so as to provide the best possible oil flow characteristics.

 

 

This is a really good and useful kit! Eliminate the OE lines and directly bolt A/N fittings and flexible stainless steel lines to the OEM oil filter housing.

This kit fits directly on to E36 Euro and S54 Oil Filter Housings with no mods or hard work.


Estimated Product Shipping Weight inc Packaging: 2.00 Kg

 

 

This is a custom made aluminum pan specifically engineered for dry sump use, not just a modified stock pan. required if buying a dry sump kit.

-6061 T6 heavy duty flange
-(3003 aluminium) TIG welded construction built on a fixture to maintain flat pan rail
-Welded in fittings and drain plug
-Internal screen
-Internal manifold
-3 pick up points for use with 4 stage pump



Estimated Product Shipping Weight inc Packaging: 12.00 Kg

 

 

Ever have an oil pump sprocket retaining nut back off and lose oil pressure? How about shearing off the oil pump shaft with the sprocket and nut still attached and then losing your engine? Well, IT CAN HAPPEN TO YOU with the original oil pump sprocket. UPGRADE your oil pump with this Oil Pump Upgrade Kit and safeguard yourself against silly oil pump failures. Kit is easy to install but requires a press.

Available for the following engines:

M52tu
M54tu
S50 M3
S52 M3
S54 M3
Z4M
M60
M62 (E39 M5)
* PLEASE STATE EXACT MODEL WHEN ORDERING.

Oil Pump Upgrade Kit include most or all the following parts,(varies by model) :
New design oil pump shaft
New design oil pump sprocket
New Key for Scavange Section
Grade 8 retaining hardware


Estimated Product Shipping Weight inc Packaging: 2.00 Kg

 

 

This pulley is designed to overdrive the engine water pump pulley by approx 10%, to improve engine cooling.

Can be used on it's own or in conjunction with other cooling upgrades such as enlarged radiator etc.

A new drive belt may be required, depending on engine model.

Estimated Product Shipping Weight inc Packaging: 2.00 Kg

 

 

Riss Racing’s Oil Catch Can

This Oil Catch Can takes all the excess oil and moisture in the blow by. Now, you will not have to worry about carbon and sludge build-up in the intake system, intercooler and the turbo. Comes with the authentic Riss Racing logo and sight - level pipe which will allow you to see exactly how much oil is being caught!

*Please refer to Variations section to see black version and also fitting kit.

Estimated Product Shipping Weight inc Packaging: 5.00 Kg

 

 

Direct replacement oil filter housing lid incorporating two threaded ports to allow connection of aftermarket gauges ( Eg: oil pressure and oil temperature).

This version is suitable for the following engines :

BMW E30.E36.E36/M3.E46/M3
M40.M42.M50.S50.S52.S54

Please refer to alternate listing on Variations Section (use red link button at top right) for lid to suit the following:

BMW E36/328.E46
M44.M52.M52TU.M54




Estimated Product Shipping Weight inc Packaging: 1.00 Kg

 

 

CA AUTOMOTIVE /OTHER UPRATED OIL COOLER KIT